ravinderpal4728@gmail.com

Brooch Cutter Machine

Broach cutters, more widely known as annular cutters, are used to process holes in hardened steel and stainless-steel materials. Broach cutters outperform traditional twist drills and are commonly used in general fabrication, machining and construction. When used with a magnetic drill or press, our broach cutters can significantly reduce project or construction time, making them a great choice for producing finished and accurate hole.

Our broach cutters are available in Tungsten Carbide Tipped [TCT] or High-Speed Steel [HSS]. HSS broach cutters are most common, providing good stability and regrinding characteristics. The multi-cut geometry improves performance of centering as well as removal of chips, resulting in good efficiency and longevity.

While slightly more expensive than our HSS cutters, the TCT broach cutters are suitable on various materials given their higher cutting speeds and good drilling performance. The tungsten carbide tips guarantee reduced damage of tips and better endurance, and the multi-cut geometry allows for increased chip removal and less resistance.

The diameter of our broach cutters ranges from 12mm to 50mm. Our HSS range is available with a 50mm or 25mm depth, while our TCT range is available only in a 50mm depth. Broach cutters are generally available with a weldon or universal shank. The traditional weldon shank comprises of two flat areas for machine grub screws to tighten the broach, while the universal shank also has pin inlets. Most of our broach cutters have universal shanks, making them suitable for weldon chuck machines and quick release machines alike. If you wish to use a weldon broach cutter in a quick release system, we supply a weldon to universal adapter. Note, change adapters are not required for universal cutters.